In case of assembled product, 3D is required
3D automated X-ray inspection for automotive & small die casting
For Automotive, Small die-casting, Smartphone, Camera application, PCB
SEC Co., Ltd / SEC Europe Head Offcie / Automated X-ray Inspection/Nanotech Digital GmbH / Analysis report
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI,X-eye 7300(2)](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXIX-eye-73002.png)
» Analysis systems : by SEC Co.,Ltd
» Inspection method: 3D
» Model type: Full-Auto
» Model name: X-eye 7300NTI
» Tact time: 18sec/1 FOV (Field of view)
Productivity and inspection time can be different according to sample
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI, inspection image of 7300](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXI-inspection-image-of-7300.png)
X-eye 7300 model is a full-auto inspection system that can minimize human errors.
And core inspection technology of design / mass production to maintain quality up to EOL( End of life )
X-eye 7300 is best 3D CT AXI solution for its high image quality and inspection
reliability. This system and hybrid tube are developed, manufactured by its own
SEC technology.
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI, 2.5D X-ray image of assembled production](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXI-2.5D-X-ray-image-of-assembled-production-1-1.png)
X-ray image of assembled product with 2.5D
In case of assembled product, 3D is required.
In general, 3D inspection is required for quality control in the following application:
Automotive PCB, Barrel pin, Void of BGA and component, crack of molding or case, connection pin and cable.
This is an image sliced from the side after taking the above image in 3D.
- For checking solder filling in inspection point
- For checking soldering shape and barrel pin height and width with shape
- Available for Module inspection in assembled products
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI, section image of assembled production](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXI-section-image-of-assembled-production.png)
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI,image of Aluminum die casting for X-ray inspection](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXIimage-of-Aluminum-die-casting-for-X-ray-inspection.png)
![[Nanotech Digital GmbH]Automated x-ray inspection, AXI, Void inspection image of Aluminum die casting](http://automatedxray.com/wp-content/uploads/2021/07/Nanotech-Digital-GmbHAutomated-x-ray-inspection-AXI-Void-inspection-image-of-Aluminum-die-casting.png)
Cracks degrade the surface quality of the die and consequently the surface of the casting.
In the die casting production process, the mold is repeatedly heated, and microcracks are generated due to the molding surface and internal deformation.
- For checking soldering shape and barrel pin height and width with shape
- Available for Module inspection in assembled products